| |
-
- O-15 OXYGEN GENERATOR SPECIFICATIONS
Using Pressure Swing
Adsorption (PSA) technology, the Model O-15 extracts oxygen from the
atmosphere, concentrating it up to 95% purity, and delivering the oxygen to
any application such as glass blowing, ozone generation etc.. |
-
-
Dependable
The O-15
is completely self-contained. Its internal air compressor, filtration
system, Zeolite sieve, surge tank, and flow control system were designed
for 24 hour operation.
-
Durable
The O-15
is built on a powder coated steel chassis. Its anodized aluminum sieve
beds are fitted with custom molded composite end caps for years of
reliable service. Weighing 73 lb. (33kg) the O-15 is the industrial
strength oxygen concentrator.
-
Safe
Why bother
with the danger of high-pressure cylinder oxygen? The O-15's built-in
regulator allows you to set the delivery pressure according to your
needs. The 1/3 Horsepower compressor maintains an internal pressure of
less than 32 psi, and delivers an optimal flow of oxygen at up to 12
psi.
-
Economical
Oxygen is
free! Eliminate the unnecessary costs of transportation, storage, and
cylinder rental. The O-15 uses less than 1/2 kilowatt of electricity to
deliver up to 15 cubic feet of oxygen per hour. This product is cost
effective and energy efficient.
$1870.00 - and up (depending on options ordered)
|
 |
Simple to Use and Maintain
With a lighted
on/off switch, integrated control panel, digital hours meter, custom flow
gauges and controls, the O-15 is truly user friendly. Just plug it in, turn
it on, and set the desired pressure and flow. Check and clean the inlet air
filter every 6 months, and you're done. The Zeolite sieve (which actually
separates oxygen from nitrogen) is regenerative, and does not need to be
replaced for the life of the unit.
The Model O-15 was made easy
to operate. All of the controls are on the front panel. The Power Switch,
Hours meter, Gauges, Regulator and Flow meter are easy to view and/or
manipulate.The Model O-15 can also be ordered without the internal air
compressor for operation on customer supplied air. The benefit of this
option is the standard oxygen delivery pressure of 9 psig can be raised to
30 psig. Additionally, the incoming air can be treated (dried & cleaned)
before it enters the generator, resulting in longer life in humid
environments.
- Options
Available:
-
-220 Volts AC 50/60 HZ
-
-No Cover
-
-Rubber Feet (for tabletop use)
-
-Quiet Muffler Option
-
-Pressure Switch and Relief Valve
|
Simple to Use and Maintain
With a lighted
on/off switch, integrated control panel, digital hours meter, custom flow gauges
and controls, the OG-15 is truly user friendly. Just plug it in, turn it on,
and set the desired pressure and flow. Check and clean the inlet air filter
every 6 months, and you're done. The Zeolite sieve (which actually separates
oxygen from nitrogen) is regenerative, and does not need to be replaced for the
life of the unit.
The Model OG-15 was made easy to operate. All of the controls are on the
front panel. The Power Switch, Hours meter, Gauges, Regulator and Flow meter are
easy to view and/or manipulate.
The Model OG-15 can also be
ordered without the internal air compressor for operation on customer supplied
air. The benefit of this option is the standard oxygen delivery pressure of 9
psig can be raised to 30 psig. Additionally, the incoming air can be treated
(dried & cleaned) before it enters the generator, resulting in longer life in
humid environments.
Options Available:
-
220 Volts AC 50/60 HZ
-
No Cover
-
Rubber Feet (for tabletop use)
-
Quiet Muffler Option
-
Pressure Switch and Relief Valve
| |
|