|
Air Drying
Two automatically recharged alumina desiccant cylinders. Vacuum driven,
compressor not required.
Process Gas
Ambient air, free of dust and oil.
Dry Air Capacity
Up to 160 L/min (320 SCFH) ambient air at 85% R.H. 35°C.
Resulting Dew Point
-60°C or better. Dew point indicator (blue crystals) included.
Air Flow Resistance
Approximately 60cm (24") of water column at full flow.
Cooling
Ambient air ±40°C max. 85% R.H.
Power
120V/60Hz, max. 6A, average 500W.
NOTE: In 230V/50Hz operation, the dryer receives 120V
power from an associated ozone controller.
Heating Elements
Heavy duty stainless steel.
Dimensions
1450mm high x 500mm wide x 150mm deep (57" x 20" x 6"). Wall or rack
mounted steel cabinet with attached aluminum cylinders.
Certification
All parts are CSA and UL certified
Warranty
3 years general. The rate of the air drying desiccant depletion is
subject to local air quality, and it is expected to last 3 years in normal
conditions. Premature depletion of the desiccant is not covered under warranty.
Installation
Refer to installation manual for specific conditions.
Operation
In conjunction with ozone generators, controllers, mixing systems, and other
equipment approved by the Application Engineering Department.
|
