| |
-
- TOPAZ OXYGEN GENERATOR SPECIFICATIONS
Using Pressure Swing
Adsorption (PSA) technology, the Model O-15 extracts oxygen from the
atmosphere, concentrating it up to 95% purity, and delivering the oxygen to
any application such as glass blowing, ozone generation etc.. |
-
-
Dependable
The Topaz
is completely self-contained. Its internal air compressor, filtration
system, Zeolite sieve, surge tank, and flow control system were designed
for 24 hour operation.
-
Durable
The Topaz
is built on a powder coated steel chassis. Its anodized aluminum sieve
beds are fitted with custom molded composite end caps for years of
reliable service. Weighing 73 lb. (33kg) the O-15 is the industrial
strength oxygen concentrator.
-
Safe
Why bother
with the danger of high-pressure cylinder oxygen? The Topaz built-in
regulator allows you to set the delivery pressure according to your
needs. The 1/3 Horsepower compressor maintains an internal pressure of
less than 32 psi, and delivers an optimal flow of oxygen at up to 12
psi.
-
Economical
Oxygen is
free! Eliminate the unnecessary costs of transportation, storage, and
cylinder rental. The O-15 uses less than 1/2 kilowatt of electricity to
deliver up to 15 cubic feet of oxygen per hour. This product is cost
effective and energy efficient.
$1870.00 - and up (depending on options ordered)
|
 |
Simple to Use and Maintain
With a lighted
on/off switch, integrated control panel, digital hours meter, custom flow
gauges and controls, the Topaz is truly user friendly. Just plug it in, turn
it on, and set the desired pressure and flow. Check and clean the inlet air
filter every 6 months, and you're done. The Zeolite sieve (which actually
separates oxygen from nitrogen) is regenerative, and does not need to be
replaced for the life of the unit.
The Model
Topaz was made easy
to operate. All of the controls are on the front panel. The Power Switch,
Hours meter, Gauges, Regulator and Flow meter are easy to view and/or manipulate.The Model
Topaz can also be ordered without the internal air
compressor for operation on customer supplied air. The benefit of this
option is the standard oxygen delivery pressure of 9 psig can be raised to
30 psig. Additionally, the incoming air can be treated (dried & cleaned)
before it enters the generator, resulting in longer life in humid
environments.
- Options
Available:
-
-220 Volts AC 50/60 HZ
-
-No Cover
-
-Rubber Feet (for tabletop use)
-
-Quiet Muffler Option
-
-Pressure Switch and Relief Valve
|
Simple to Use and Maintain
With a lighted
on/off switch, integrated control panel, digital hours meter, custom flow gauges
and controls, the OG-15 is truly user friendly. Just plug it in, turn it on,
and set the desired pressure and flow. Check and clean the inlet air filter
every 6 months, and you're done. The Zeolite sieve (which actually separates
oxygen from nitrogen) is regenerative, and does not need to be replaced for the
life of the unit.
The Model OG-15 was made easy to operate. All of the controls are on the
front panel. The Power Switch, Hours meter, Gauges, Regulator and Flow meter are
easy to view and/or manipulate.
The Model OG-15 can also be
ordered without the internal air compressor for operation on customer supplied
air. The benefit of this option is the standard oxygen delivery pressure of 9
psig can be raised to 30 psig. Additionally, the incoming air can be treated
(dried & cleaned) before it enters the generator, resulting in longer life in
humid environments.
Options Available:
-
220 Volts AC 50/60 HZ
-
No Cover
-
Rubber Feet (for tabletop use)
-
Quiet Muffler Option
-
Pressure Switch and Relief Valve
| |
|