|
The WATERZONE-40 is similar to the smaller
WATERZONE-30. The TS-40 Ozone Generator is used on this ozone injection
system to produce an additional 10 g/hr of ozone. Ozone Injection System
designed to quickly integrate into an existing water line. The WATERZONE
system produces and introduces 40 g/hr of ozone into up to 70 GPM of water
flow. This water can be used for food processing, surface disinfection or
basic water treatment. |
-
Features
- -Very efficient with excellent mass
transfer of ozone
- -Ozone generated from oxygen efficient operation
- -one switch will start entire system
- -Stainless Steel off-gas tank
- -Stainless Steel pump with Viton Seal
- -All plumbing and fittings are stainless steel
- -Tri-Clamp connections are used
- -Included water trap protects ozone generator from any water damage
|
 |
| Product Specifications |
| Flowrates |
Up to 70 GPM water flow (flow
rates from 5-70 GPM are acceptable) |
| Ozone Production: |
40 gm/hr |
| Oxygen Production: |
10 LPM O2 @ 93% purity |
| Capacity: |
Will dose 20 GPM
with 8 PPM Ozone |
| |
30 GPM with 6.0 PPM Ozone |
| |
50 GPM with 3.5
PPM Ozone |
| |
70 GPM with 2.5
PPM Ozone |
| |
Dissolved ozone
levels of at least 2.0 PPM at 70 GPM |
| Wetted Materials: |
Stainless Steel, Viton seals & Kynar injector |
| Power Required: |
220V/60Hz (220V/50Hz Available) |
| Remote Start: |
System can be started remotely using provided
contacts in the controller |
| Ozone Generation Method: |
Via corona
discharge using dry air |
| Maximum Operating Pressure: |
Floor mounted, can be positioned against a wall |
| Maximum Operating Pressure: |
40 PSI |
| Maximum Water Pressure: |
100-PSI (7 bar) |
| Connection: |
1.5-in FNPT inlet
& outlet |
| Water Pressure drop at 50 GPM |
less than 3 PSI |
| Warranty: |
1-year |
| Dimensions: |
42-inches wide x
42-inches deep x 50-inches tall
|
| Lead Time: |
2 weeks |
|
|
